Temperature Humidity & Salt Spray Test chamber
Temperature Humidity & Salt Spray Test chamber
GENERL SPECIFICATIONS
Packaging Dimensions: (WxDxH) 3600*1800*2500mm
Power supply source: Three-phase, 380V, 50Hz
STANDARD PARAMETERS
Model | HD-E808-3600 |
Internal Size (W*D*H) | 3000*1000*1200mm |
External Size (W*D*H) | 3400*1600*2300mm |
Equipment Material | PP rigid plastic plate, thickness 8mm |
Temperature Range | Room temperature ~ 55℃(Adjustable) |
Brine Temperature Range | Room temperature ~ 70℃ |
Temperature Fluctuations | ≤±0.5℃ |
Temperature Uniformity | ≤±2℃ |
Temperature Precision | ±1℃ |
Max Loading Weight of Inner Chamber | 500kg |
Controller | PLC controller, touch screen |
Spraying method | Continuous and Periodic spray type |
Test Chamber Temperature | Salt Spray Method (NSS ACSS)35±1℃ |
Saturated air Barrel Temperature | Salt Spray Method (NSS ACSS)47±1℃ |
Brine Temperature | 35℃±1℃ |
Spray Quantity | 1.0~2.0 ml / 80cm2 / hr |
PH value | Salt Spray Method (NSS ACSS6.5~7.2) |
The Vent | Ф60mm exhaust hole is set behind the laboratory |
Lab Volume | 3600L |
Brine Tank Capacity | 5L |
Multiple Safety Protection Devices | Current discharge protection, over pressure protection, over temperature protection, over load fuse protection |
Accessories | Testing Salt / Measuring tank / Spray Nozzle x 3 set |
Air source | Air pump with capacity 120L(provided by buyer) |
Voltage | Three-phase, 380V, 50Hz/60Hz |
Test criteria | ASTM B117-08, ISO 9227... |
PRODUCT FEATURES
1. Durable hard 8mm PP construction, anti-corrosion and easy to clean.
2. Reservoirs with mixing system on stand.
3. Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
4. Exposure zone lined with corrosion-resistant PP sheets.
5. Clear cover allows viewing of test conditions.
6. Peaked cover prevents dripping of condensation onto samples.
7. Water seal and water level protection system.
8. Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
9. Automatic DI water fills to humidifying tower.
10. Digital temperature control.
11. Integral over-protection on heaters.
12. Low water cut-off protection on humidifying tower.
MACHINE INSTALLATION REQUIREMENT
1. The place to installation machine need to be level, well ventilated, free of flammable, explosive, corrosive gas and dust;
2. There is no strong electromagnetic radiation source nearby;
3. Ground load-bearing capacity of the site: not less than 600kg/m2;
Leave A Message
CONTACT PERSON :Mrs. Zhong
TEL : +86-0769-8905 5588
E-MAIL : manager@qc-test.com
PHONE : +86-13602361535
FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town, Dongguan City, Guangdong Province.
Quick Link
HAIDA Test Equipment
About Us
Contact us
