PP and PE Melt Flow testing machine

PP and PE Melt Flow testing machine

Specifications

Melt Flow testing
1.Melt Flow Indexer is used to determine melt-mass flow rate .
2.High quality,melt indexer
3.Direct factory

Melt Flow testing for PP and PE

1.Melt index tester is used to determine melt-mass flow rate (MFR).
2.High quality,melt indexer

Product introduction

Main parameters of machine:

• Testing range: 0.1-800.00g/10min (MFR)  & 0.1-800.00 cm3/10min(MVR)
• Temperature range: Room temperature~400°C
• Displacement accuracy: 0.01mm
• Standard loads: 325g, 875g, 960g, 1200g, 1640g, 2500g, 4100, 5000g & 5000g
• Combination load: 325g, 1200g, 2160g, 3800g, 5000g, 7160g, 10000g, 21600g
• Material cutting method: Manual, timing and automatic cutting (optional)
• Time setting: 0.1~999.9min
• Cylinder: Diameter 9.5504±0.0076mm
• CE certificate, Quality certificate are included

By Industry:
Measurement of Quality; rubber and plastics; universities; research laboratories; commodity inspection arbitration, technical supervision departments; petrochemicals; other industries.

Q1: May I know your MFI can meet our test condition 190 degree C, use 2160 g weight?
A1: Yes, our machine can be up to 400℃ and it is equipped with nine loads which can combine to the load you required

Q2: Do your universal machine be compatible for different sensors and clamps as we want to do tensile, flexural and compression test in one machine?
A2: Yes, sure. We can offer suitable clamps as per your sample size and they can be changed on one machine.

Q3: You can offer all impact weights and sample supports?
A3: For impact weight, you offer one with machine but if you require more, we can offer but we need to quote separately.
    For sample supports, yes, our machine offers supports both Charpy and Izod test.

Q4: Do you have 5 stations for Pipe Hydrostatic Pressure and Burst Testing Machine?
A3: Yes, normally we offer 3 stations but we can do 5 stations for customer.