ISTA Incline Impact tester
Applications:
Incline Impact tester are used to simulates environmental dynamic forces that packaged goods may endure throughout transport and handling operations. These hazardous dynamics are simulated using impact test systems. Inclined impact test systems utilize a carriage that propels the test sample down a ramp at predetermined velocities before impacting into a fixed backstop.
This side impact testing is used in numerous laboratory applications, including product and packaging design, packaged product transport simulation, and palletized unit load stability validation.
![Incline Impact Tester 5]()
![Incline Impact Tester 6]()
![Incline Impact Tester 7]()
Design Standatd:
ISTA 3E, 3J & ISTA 6 (inclined impact test), EN ISO 2244-2002
Packaging Dimensions: approx25CBM
Power supply source: three-phase, 380V±10%, 50/60Hz (can be appointed)
Gross Weight: approx. 3000kg
Hardware Features:
1. The whole is composed of thickened square pass, thickened I-beam and solid steel to avoid impact displacement during testing and ensure the stability of the machine;
2. The appearance of the machine adopts the paint spraying process, with high anti-rust ability and beautiful appearance;
3. The track and impact pulley have a strong load, up to 500kg;
4. Double oil cylinder lifting device, the structure is more solid and stable;
5. The impact pulley is equipped with pulleys, and the sliding friction is small to ensure the accuracy of the data;
6. After the test platform hits the impact plate, the impact plate has anti-secondary impact impact to ensure the accuracy of the data.
Software Features:
1. Adopt touch screen PLC program control, easy to operate;
2. The switch sensor is used to sense the impact pulley, and the program automatically calculates the impact speed to ensure the speed is accurate;
3. Abnormal fault alarm prompts to ensure the safe operation of the equipment.
Item | Description |
Load capacity | 500kg (can be customized) |
Impact surface dimension | 1600*2000*20mm (can be customized) |
Rolling carriage table dimension | 1500*1500mm (can be customized) |
Max size of sample | 1500*1500*1500mm(L*W*H) |
Control system | Touch screen controller |
Max. slide length | 2000mm (can be customized) |
Impact velocity error | ≤±5% |
Velocity range | 1.1~2.3m/s |
Plane inclined to the vertical angle | 10° |
Impact surface material | Steel |
Working condition | Temperature 0~40°, humidity ≤80% (no condensation) |
Safety features | E-Stop Over-load protection Upper and lower limit switches Load sensor with automatic retreat |
Dimensions | 6990*1600*1980mm(L*W*H) |
Weight | 2700kg |
Air sourse | ≥ 0.6MPa (User-supplied) |
Oil tank | 40L (User-supplied) |
Power | 3∮380V |
Please watch VCR:
