plastic calormeter
Usage & Function:
This plastic calormeter has an intelligent, miniaturization, unit combination takes three major characteristics of the new type of thermal analysis instrument. It is widely used in material melting and solidification, decomposition, combination, reduction oxidation, crystallization, phase diagram production, the catalyst development, is organic, inorganic and polymer, mineral, oil chemical industry, textile, medicine, etc, the main analysis method with convenient computer data processing system.
Main parameters of machine:
|
Temperature |
Room temperature - 500℃ |
|
Temperature resolution |
0.1 ℃ |
|
Heating rate |
1 ~ 80 ℃ / min |
|
DSC range |
0 ~ + 300 mw |
|
DSC resolution |
0.01 mW |
|
DSC sensitivity |
0.1 mW |
|
Operation |
Touch screen / PC |
|
Power |
Single phase, AC 220V, 50Hz |
|
Accessory |
One set computer& software |
Related standards
About Film/Plastic Film Materials:
ASTM D882: Tensile Test
ASTM F1306: Puncture Test
ASTM D1938: Trouser Tear Test
ASTM D2732: Thermal Shrinkage Test
ASTM D1709, ISO 7765-1: Free-Falling Dart Method
ASTM D1894: Static and Kinetic Coefficients of Friction
ASTM D1424, ASTM D1922, ISO 1974: Elmendorf Tearing Strength Test
About Plastic& Plastic Pipe Materials:
ISO 180: Izod Impact Test
ISO 9966: Ring Stiffness Test
ISO 179: Charpy Impact Test
ISO 4892: Weathering Aging Test
ASTM D3163: Plastic Lap-Shear Test
ISO 4422, ISO 3127: Pipe Impact Test
ASTM D4565, ISO 11357, EN 728: DSC/OIT
ISO 75: Heat Deflection Temperature (HDT)
ASTM D1598: Hydrostatic Pressure and Burst Test
ISO 1133, ASTM D1238: Melt Flow Rate Test (MFR/MVR)
ASTM D790, ISO 178, ISO 14125, ASTM D6272: Bend Test
ISO 306, ASTM D1525: Vicat Softening Temperature (VST)
ASTM D882, ASTM D 638, ISO 527, ASTM D1708: Tensile Test
About Rubber Materials:
ASTM D412, ISO 37-2005, JIS K6251,DIN 53504-2009: Tensile Strength & Elongation Test
ASTM D1149-07, ASTM D1171-99, ISO 7326, ISO1431-1, DIN 53509-1: Ozone Aging Test
ASTM D624-00, ISO 34-1: Tearing strength Test
ASTM D395-03, ISO 815-1: Compression Set Test
ASTM D2240-05, ISO 7619-1, JIS K6253, ISO 868: Shore Hardness Type A/D
ASTM D573, ASTM D865, ISO188 Method B, DIN 53508 High/ Low Temperature Test
ISO 2781(Method A): Density Test
ASTM D5289-95/ ISO6502: No-Rotor Rheometer/Curemeter
ASTM D1646: Mooney Viscometer
Leave A Message
CONTACT PERSON :Mrs. Zhong
TEL : +86-0769-8905 5588
E-MAIL : manager@qc-test.com
PHONE : +86-13602361535
FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town, Dongguan City, Guangdong Province.
Quick Link
HAIDA Test Equipment
About Us
Contact us
