حصلت معدات اختبار Haida على شهادة مؤسسة التكنولوجيا الفائقة الجديدة في 2019 هاتف : +86-13602361535 البريد الإلكتروني: manager@qc-test.com
Flame Temperature Calibration Device 50W
This calibration device is designed in accordance with ASTM D5207-03 and related IEC, UL, GB standards for measuring flame temperatures in combustion test equipment.
Produktbeschreibung
This calibration device is designed in accordance with ASTM D5207-03 and related IEC, UL, GB standards for measuring flame temperatures in combustion test equipment.
Calibration Procedure:
Position the copper block 10±1mm above the needle flame burner.
Ignite the flame; the time for the copper block temperature to rise from 100°C±2°C to 700°C±3°C must be 44±2 seconds to validate the flame for testing.
Perform three measurements, allowing the copper block to cool naturally to <50°C between tests.
Produkt Technische Daten
| Modell | 6014-HD |
| Thermocouple | Armored K-type (NiCr/NiAl) fine-wire thermocouple with a 0.5mm diameter sheath |
| Timer | Adjustable range: 0.01–99.99 seconds |
| Copper Block Specifications | |
| Diameter | Ø5.50±0.01mm |
| Length | 8.80±0.02mm |
| Bevel Angle | 45±0.5° |
| Mass (Pre-drilling) | 1.76g±0.01g |
| Material | High-conductivity electrolytic copper |
| Surface Finish | Fully polished |
اترك رسالة
رابط سريع
هيدا معدات الاختبار
عنا
اتصل بنا