universal test machine series

Haida Universal Test Machine Series

Universal testing machine can do tensile strength test, stretched, compressed, elongate, fatigue, bending, shearing, tearing, peeling test with ASTM,ISO,CE,ISO, EN.... universal test machine applicable to plastic sheet, pipe, profiled material, plastic film and rubber, wire and cable, steel, fiberglass and other materials performance testing, universal tester is the material development, physical testing, teaching research, quality control and other indispensable testing equipment. As an important part of the instrument, different materials need different fixture, and it is also an important factor for the test to proceed smoothly and the accuracy of the test results.

HD-B609 Universal testing machine 

Test item: tensile strength test, stretched, compressed, elongate, fatigue, bending...

Test material: Paper, Tape, Fiber, Film, Textile, Fabric, Foam...

Test standards: ASTM,JIS,CE, ISO,EN,BS EN,SAE,FTM..

Test capacity: 0-200kg (5,10,50,100kg are optional)

Control system:LCD with build-in printer /PC with windows 7 system

Test speed: 0.1~500mm/min (can be adjustable)

                                                                                                                                      >>Get a Free Quotation    >>More Detail 

HD-B604 Universal testing machine 

Test item: tensile strength test, stretched, compressed, elongate, fatigue, bending...

Test standards: ASTM,JIS,CE, ISO,EN,BS EN,SAE,FTM..

Test material:Leather, Textile, Fabric, Foam, Wire, Cable, Steel, Metal, Composite...

Frame capacity: 0-2000kg (500,1000kg are optional)

Control system: PC with windows 7 system

Test speed: 0.1~500mm/min (adjustable)

                                                                                                                                                                           >>Get a Free Quotation    >>More Detail 

HD-B615 Universal Test Machine

Test item: tensile strength test, stretched, compressed, elongate, fatigue, bending...

Test material:  Wire, Cable, Steel, Metal, Composite, Plastic Pipe...

Test standards: ASTM,JIS,CE, ISO,EN,BS EN,SAE,FTM..

Frame capacity: 5000kg(1000,2000kg are optional)

Load accuracy: 0.5% F.S  Test speed: 0.1~300mm/min (adjustable)

Control system: PC with windows 7 system

                                                                                                                            >>Get a Free Quotation    >>More Detail 

HD-B616 Universal test machine 

Test item: tensile strength test, stretched, compressed, elongate, fatigue, bending...

Test material:  Wire, Cable, Steel, Metal, Composite, Plastic Pipe...

Frame capacity: 0-100T(30T, 60T are optional)

Measure range: 4%-100%F.S

Load accuracy: 1% F.S

Test speed: 50mm/min

Operation control: Hydraulic

                                                                                                                           >>Get a Free Quotation    >>More Detail 

HD-B617 Universal test machine 

Frame capacity: 0- 500kg(5,10,50,100,200kg are optional)

Control system : LCD with build-in printer /PC / Software : TM 2101

Vertical test space: 1400mm including fixture

Test speed: 50~300mm/min (adjustable by rotary knob)

Test item: tensile strength test, stretched, elongate, fatigue...

Test material: Tape, Fiber, Film, Plastic, Rubber, Leather, Textile...

                                                                                                                      >>Get a Free Quotation    >>More Detail

Universal Testing Machine Procedures

1. Connect the power supply and wait for the system to enter the standby interface.
2. Press "Detection key", according to the system display, select the corresponding test type.

3. Press the corresponding number key, then press the confirmation key,
4. Turn on the motor switch, add load start, at the same time observation value (or displacement, peak) and rate, according to the amount of Cheng switching force value range. 5. When the specimen is broken, the test is completed and the test data is printed automatically.

Universal Testing Machine Test Software

The TM2101 software is designed purposely for computer controlled electronic universal testing machine,  used for tension, compress, bend, shear, tearing andpeel test. With the personal computer and interface plate, it could collect, save, process and print test result. Further it can calculate multiple parameters, i.e. maximum force, yield strength, average peel force maximum deformation, yielding point and elastic modulus; this system is featured in curve process, multi-sensor support, image interface, flexible data process and powerful system function.