loading

Haida test equipment obtained certificate of new high-tech enterprise in 2019                                        Phone:+86-13602361535     E-mail:manager@qc-test.com

Sponge indentation hardness testing machine 1
Sponge indentation hardness testing machine 2
Sponge indentation hardness testing machine 1
Sponge indentation hardness testing machine 2

Sponge indentation hardness testing machine

    oops...!

    no product data.

    Go to homepage

    Sponge indentation hardness testing machine


    Sponge indentation hardness tester Description:

    Sponge indentation hardness testing machine is also known as sponge, foam indentation hardness testing machine, tensile metallic and non-metallic, polymer materials, compression, bending, detection of low cycle fatigue and other projects can be according to customer product requirements according to GB, ISO, ASTM, JIS, EN and other standards for the preparation, to automatically strike the biggest test, fracture strength, yield strength, tensile strength, compressive strength, flexural strength, elastic modulus, elongation , constant elongation stress, elongation and other parameters given stress.



    Measurement principle:

    The sample is placed between the upper and lower platen, the pressure plate at a predetermined speed compression specimens down to a certain size when national standards concavity A method (B method, C Act) as required, on which the load cell to sense the pressure back to the computer processing and display, so the measured pressure sponge, foam and other materials such as depression sample hardness.



    Technical parameters:


    Control

    computer control

    Display

    computer display

    Induction method

    200kg

    Unit switch

    Kg, N, LB

    The pressure   plate

    Diameter 200mm,   bottom fillet R1mm

    The following   platforms

    420 × 420mm,   holes diameter 6mm, spacing 20mm

    Test speed

    100 ± 20mm/min;   Power Source

    Transmission

    precision screw

    Power supply

    single-phase,   220V, 50Hz/60Hz, 2.5A

    Weight

    160kg


    Design Standards:

    GB/T10807-2006


    Sponge indentation hardness testing machine imageSponge indentation hardness testing machine


    Leave A Message

    You can also contact me via email. My email address is manager@qc-test.com
    Related Products
    no data

    

    CONTACT PERSON :Mrs. Zhong
    TEL : +86-0769-8905 5588

    E-MAIL : manager@qc-test.com
    PHONE : +86-13602361535
    FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town, Dongguan City, Guangdong Province.

    Contact us

    Copyright © 2024 Haida International Equipment Co., Ltd. | Sitemap
    Customer service
    detect