Haida test equipment obtained certificate of new high-tech enterprise in 2019 Phone:+86-13602361535 E-mail:manager@qc-test.com

MFR Melt Flow Testing Machine

Price:

FOB, CIF

Payment:

L/C, D/P, T/T

Package:

Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.

Minimum:

1 SET

Delivery:

15 days after order.

Country:

China

BrandName:

Inquiry

Write a Review

MFR Melt Flow Testing Machine

Brief introduction:

MFR Melt Flow Testing Machine is used to determine melt-mass flow rate (MFR).

MFR Melt Flow Testing Machine is applicable not only to the higher melting temperature, such as masterbatches, polycarbonate, nylon, fluoro plastics, poly oxide and other engineering plastics, and it also applies to plastic measurement of melt lower temperature, such as polyethylene, polystyrene, polypropylene, ABS resin, poly formaldehyde resin. At the same time, it is widely used in plastics raw materials products, the petrochemical industry and related universities, scientific research institutes, and commodity inspection departments. It is based on designed and manufactured according to latest national and international standards.

According to the standard

This instrument reference standards: ISO 1133, ASTM D1238, JIS-K72A, GB/T3682, JB/T5456, JJG 878

The main technical parameters：

Testing range	0.1-800.00g/10min (MFR)
Temperature range	Room temperature~400°C
Controlling Accuracy	±0.2°C
Timing accuracy	0.1s
Displacement accuracy	0.01mm
Standard loads	325g, 875g, 960g, 1200g, 1640g, 2500g, 4100, 5000g & 5000g
Combination load	325g, 1200g, 2160g, 3800g, 5000g, 7160g, 10000g, 21600g
Material cutting method	Manual, timing and automatic cutting (optional)
Time setting	0.1~999.9min
Cylinder	Diameter 9.5504±0.0076mm
Land of piston	Diameter 9.4742±0.0076mm, length: 6.35±0.13mm
Thin hole pattern	External diameter: 9.5±0.02mm; bore diameter 2.0955±0.0051mm; length 8.00±0.025mm

Structure：

The main body is the desktop structure, the design reasonable performance stable reliable, the appearance is beautiful, the operation is convenient, uses the high performance, the high precision control instrument has the sampling precision high, the control rate is fast the characteristic, uses the fuzzy PID algorithm to carry on the constant temperature control.

Main Features:

1, the heating speed is fast, the overshoot is very small.

2. High temperature precision

3, after filling, can quickly restore the state of constant temperature.

4. Manual and Automatic test method can be used.

5. The test parameters are calibrated and corrected conveniently.

6. With printer.

Related standards
About Film/Plastic Film Materials:

ASTM D882: Tensile Test

ASTM F1306: Puncture Test

ASTM D1938: Trouser Tear Test

ASTM D2732: Thermal Shrinkage Test

ASTM D1709, ISO 7765-1: Free-Falling Dart Method

ASTM D1894: Static and Kinetic Coefficients of Friction

ASTM D1424, ASTM D1922, ISO 1974: Elmendorf Tearing Strength Test

About Plastic& Plastic Pipe Materials:

ISO 180: Izod Impact Test

ISO 9966: Ring Stiffness Test

ISO 179: Charpy Impact Test

ISO 4892: Weathering Aging Test

ASTM D3163: Plastic Lap-Shear Test

ISO 4422, ISO 3127: Pipe Impact Test

ASTM D4565, ISO 11357, EN 728: DSC/OIT

ISO 75: Heat Deflection Temperature (HDT)

ASTM D1598: Hydrostatic Pressure and Burst Test

ISO 1133, ASTM D1238: Melt Flow Rate Test (MFR/MVR)

ASTM D790, ISO 178, ISO 14125, ASTM D6272: Bend Test

ISO 306, ASTM D1525: Vicat Softening Temperature (VST)

ASTM D882, ASTM D 638, ISO 527, ASTM D1708: Tensile Test

About Rubber Materials:

ASTM D412, ISO 37-2005, JIS K6251,DIN 53504-2009: Tensile Strength & Elongation Test

ASTM D1149-07, ASTM D1171-99, ISO 7326, ISO1431-1, DIN 53509-1: Ozone Aging Test

ASTM D624-00, ISO 34-1: Tearing strength Test

ASTM D395-03, ISO 815-1: Compression Set Test

ASTM D2240-05, ISO 7619-1, JIS K6253, ISO 868: Shore Hardness Type A/D

ASTM D573, ASTM D865, ISO188 Method B, DIN 53508 High/ Low Temperature Test

ISO 2781(Method A): Density Test

ASTM D5289-95/ ISO6502: No-Rotor Rheometer/Curemeter

ASTM D1646: Mooney Viscometer

Leave A Message

You can also contact me via email. My email address is manager@qc-test.com