High Low Temperature universal test machine
High Low Temperature Universal Test Machine
Introduction:
The high low temperature universal test machine is controlled by computer and is widely used in rubber, plastic, wire and cable, textile, waterproof materials, non-woven fabrics and other non-metallic materials and metal wire, metal foil, metal sheet and metallic rods of the mechanical properties of the test, with special fixture is also applicable to a variety of finished products stretching, compression, peeling, shearing, tearing, bending (folding) test. Can print a number of data, according to different data to make graphics output comparison, high control accuracy, easy to operate, modular design, a variety of accessory accessories range, with flexible.
Standard Features:
Tensile Tester | |
Frame capacity | 2000kg |
Load cell brand | Germany brand load cell for high accuracy |
Load accuracy | 0.5% F.S |
Control system | PC with windows 7 system |
Motor | Panasonic servo motor w/AC variable speed drive system, high-precision mechanical ball screw rod |
Force reading | kgf, Ibf, N, KN, T etc |
Vertical test space | 1200mm including fixture |
Test speed | 0.1~300mm/min (adjustable) |
Curves display | Load- elongation, Elongation-time, Time-elongation, Stress-strain |
Data display | Max. force, speed, sample information, strength(Kpa, Mpa, N/mm, N/mm2) etc… |
Internal dimension(W*D*H) | 400*500*500mm |
High & Low Temperature Chamber | |
Temperature range | -40~+150℃ |
Temperature Accuracy | ±1℃ |
Cooling speed | 1℃/min in average (without loading) |
Heating speed | 3℃/min in average (without loading) |
Internal chamber material | SUS#304 stainless steel, mirror finished |
External chamber material | Stainless steel with paint spray |
Cooling method | Air cooling |
Controller | LCD touch screen, programmable control temperature and humidity can set different parameter for cyclic test |
Insulation material | 50mm high density rigid Polyurethane foam |
Heater | Explosion-proof type SUS#304 stainless steel fins radiator pipe heater |
Compressor | France Tecumseh compressor |
Lighting | Heat resistance |
Temperature sensor | PT-100 dry and wet bulb sensor |
Observation window | Tempered glass |
Testing hole | Diameter 50mm, for cable routing |
Sample tray | SUS#304 stainless steel, 2pcs |
Panasonic Servo Motor
Germany Brand Tecsis Load cell
France Tecumseh Compressor
Touch Screen LCD Controller
Leave A Message
CONTACT PERSON :Mrs. Zhong
TEL : +86-0769-8905 5588
E-MAIL : manager@qc-test.com
PHONE : +86-13602361535
FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town, Dongguan City, Guangdong Province.
Quick Link
HAIDA Test Equipment
About Us
Contact us
