Haida test equipment obtained certificate of new high-tech enterprise in 2019                                        Phone:+86-13602361535     E-mail:manager@qc-test.com

Test method of packing box drop test machine

Test method of packing box drop test machine (single drop test machine)

Drop test for packaging - transport packages

The use of the standard equivalent to international standards ISO2248-1985 (packaging complete, filled transport packages vertical blanking drop test)

1, the scope and content of the theme

This standard specifies the content of vertical impact test for main performance test equipment requirements, test procedures and test reports for transport packages

This standard is applicable to the evaluation of the protection ability of transport package under vertical impact when the impact strength and packaging on contents. It can be used as a single test, but also can be used as part of a series of tests.

2, reference standards

Mark GB/T4857.1 packaging transport packages of various parts of the

GB/T4857.2 packaging transport package temperature and humidity conditioning

The general principle of GB/T4857.17 packaging - transport packages for performance testing program

The quantitative data of GB/T4857.1 packaging - transport packages for performance testing program

3, test principle

Filed test sample to a predetermined height, and then to a predetermined state of free fall, collision and impact.

4, test equipment

The 4.1 shock machine

Impact table for the horizontal plane, the test does not move, not deformation, and meet the following requirements

A, as the entire object, quality is at least 50 times test sample quality

B, a large enough area, in order to ensure the test sample falls completely in the impact on the table

C, the impact on any two level height should not exceed 2mm

D, the impact of surface static load any 100mm2 area under 10kg, the deformation amount shall not exceed 0.1mm

4.2 lifting device

In ascension or drop in the process, should not damage the test sample

4.3 supporting device

Device support test samples should be able to make the test sample in a predetermined state institute for hair prior to release

4.4 release mechanism

In the release of the test sample in the dropping process, should make the test sample without any part of touch device, ensure the free fall

5, a drop test procedure test machine

Filed test samples to the drop height of the required position, and according to a predetermined state to support. The vertical height and predetermined difference should not exceed a predetermined height + 2%. The drop height is ready for a test sample is the lowest and the release of the distance between the shock.

According to the predetermined state, releasing test sample.

When the angle between the plane dropping, falling plane and the horizontal test sample surface maximum not exceeding 2 °

Edge drop, error of the edge and level drop surface between angle of maximum not exceeding 2 ° test sample terms and shock table angle not greater than ± 5 ° angle or 10% (with larger values for quasi), the test sample of the gravity line by dip angle.

No matter what the state and the shape of the test sample, should make the test sample of the heavy vehicle line by line, surface, drop point.

The actual impact velocity and free fall time is less than a free fall 1%.

After the test according to the relevant standards or regulations to inspect the damage filling packing and inner, and analysis of test results.

Test method of packing box drop test machine 1

prev
The advantages of the Haida new constant temperature and humidity test chamber
How to choose the constant temperature and humidity chamber
next
recommended for you
no data
Get in touch with us



CONTACT PERSON :Mrs. Zhong
TEL : +86-0769-8905 5588

E-MAIL : manager@qc-test.com
PHONE : +86-13602361535
FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town, Dongguan City, Guangdong Province.

HAIDA Test Equipment

ISTA Series Test Equipment
Battery Test Equipment
Environmental Test Chamber
Tensile Test Equipment
Paper Packaging Test Equipment
Furniture Test Equipment
Vibration Shaker Table Systems
Textile Test Equipment
Mask Making Machine
Leather & Shoes Test Machine
Luggage Test Equipment
Optical Test Equipment
Rubber and Plastic Test Equipment
RoHS Testing Equipment
Cookware Testing Equipment
Car parts testing equipment

Contact us

Copyright © 2024 Haida International Equipment Co., Ltd. | Sitemap
Customer service
detect