loading

Haida test equipment obtained certificate of new high-tech enterprise in 2019                                        Phone:+86-13602361535     E-mail:manager@qc-test.com

Battery Pack Module Charge and Discharge EV Battery Life Cycle Testing System 1
Battery Pack Module Charge and Discharge EV Battery Life Cycle Testing System 1

Battery Pack Module Charge and Discharge EV Battery Life Cycle Testing System

    oops...!

    no product data.

    Go to homepage
    Input ACAC 380V ±15%/50/60±5Hz
    Output Power24KW




    Input Current42.9A/Phase




    Input Power28.2KW




    VoltageCV output range3~60V
    Min discharge voltage3V
    Accuracy±(0.02% of FS+0.02% of RD)
    Stability± 0.1% of  FS
    CurrentOutput range/channel0.5A~100A
    Accuracy±(0.05% of FS+0.05% of RD)
    CV cut-off current0.2A
    Stability± 0.1%  of  FS
    PowerOutput power/channel6KW
    Stability±0.2%  of  FS
    TimeCurrent response timeMax rising time: 5ms  (10% to 90% or 90% to 10%)
    Working step time≤(365*24)h/step, Time format-00:00:00.000(h、m、s、ms)
    Data
    record
    Data record
    conditions
    Min data record interval:10ms (connected with AUX channel:100ms)
    Min voltage change:0.12V
    Min current change:0.2A
    Frequency100Hz (connected with AUX channel:10Hz)
    ChargeCharge modeConstant current, Constant voltage, Constant current and voltage, Constant power
    Cut-off conditionMain channel:Voltage, Current, ΔTime, Capacity,-ΔV
    DischargeDischarge modeConstant current, Constant power, Constant resistance
    Cut-off conditionMain channel:Voltage, Current, ΔTime, Capacity
    Pulse
    Mode
    ChargeConstant current, Constant power
    DischargeConstant current, Constant power
    Min pulse width100ms
    Pulse cyclesup to 32
    Chg and Dischg switchSupported
    Cut-off conditionVoltage, Time
    SimulationChargeConstant current, Constant power
    DischargeConstant current, Constant power
    Cut-off conditionTime、Line number
    Continuous switching Chg
     and Dischg
    One simulation step can realize continuous
     switching from charging to discharging
    Limit step number1 million
    CycleMax cycles65535
    Max steps254
    Cycle nest3
    Protection● Power-off data protection
    ● Off-line operation mode
    ● User-defined protection conditions,
     such as upper and lower limited current/voltage,
     delay time, temperature, etc.
    Efficiency of Charge and discharge>85%
    Protection levelIP20
    Channels parallelsupported,
    Parallel channels do not support pulse and simulation testing
    Channels featureIndependent pairs of closed loop for constant
    Energy feedbackThe discharge energy can be fed back to the grid
    Channels control modeIndependent control
    Noise≤65dB
    DatabaseMySQL
    CommunicatinTCP/IP
    Data exportEXCEL、TXT、CSV、PDF、Plot/Graph
    Disk drive500GB
    Operating systemWindows 7/8/10 64 bit
    Communication portEthernet port, CAN communication supports communication
     with BMS to obtain cell voltage and temperature in BMS
    ItemsValues
    Number of channels4
    Dimensions(W*D*H)(mm)W*D*H:600*800*1300(mm)
    Working Environment requirement
    ItemsValues
    Operation environment temperature-10℃~45℃(When the temperature is 25±10℃,
    the measurement accuracy is guaranteed: accuracy drift 0.005% of FS /℃)
    Storage environment temperature-20℃~50℃
    Operation environment humidity≤70% RH(no moisture condensation)
    Storage environment humidity≤80% RH(no moisture condensation)


    Other models (Voltage and Current)




    60V20A60V30A60V50A60V60A60V100A60V120A
    60V400A60V240A120V50A120V100A120V200A120V400A
    200V50A500V100A200V200A400V200A750V500A800V600A
    Machine equips Charge and Discharge Port or Discharge voltage below 0V is Optional


    Leave A Message

    You can also contact me via email. My email address is manager@qc-test.com
    Related Products
    no data

    

    CONTACT PERSON :Mrs. Zhong
    TEL : +86-0769-8905 5588

    E-MAIL : manager@qc-test.com
    PHONE : +86-13602361535
    FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town, Dongguan City, Guangdong Province.

    HAIDA Test Equipment

    Contact us

    Copyright © 2024 Haida International Equipment Co., Ltd. | Sitemap
    Customer service
    detect