Climatic Chamber 100L

Climate Chamber 

Climate Chamber Video                  Climate Chamber Brochure

Climate chamber is a save space and economic solution by doing climate environment test,temperature humidity test,holding test, cooling-off test, heating-up test, moistening test and drying test…etc.In order to save space, the chamber adopts vertical box design.Internal dimension: 100L (can be customized: 150L,225L,408L,800L...),and The Climate chamber power generally adopts international standard, also can replace local power supply according to customer's requirement.

Basic parameters

1. Temperature range: -40~+150℃

2. Humidity range: 20~98%RH (Refer Image below)

3. Internal dimension (W*D*H): 400*500*500mm

4. External dimension (W*D*H): 600*1080*1380mm

5. Controller: LCD touch screen, programmable control temperature and humidity

    

Experimental space volume:

100L/150L/225L/408L/800L/1000L (can be customized)

Test standard(including but not limited to... ):

Compliance with ASTM G53-77 specifications GB, GJB, MIL, ASTM, CNS, IEC, JIS, AATCC, DIN, Fed Test, BS and SAE.

Standard Parameter

1. Internal dimension (W*D*H): 400*500*500mm

2. External dimension (W*D*H): 600*1080*1380mm

3. Temperature range: -40~+150℃

4. Temperature fluctuation: ±0.5℃

5. Temperature uniformity: 2℃

6. Humidity range: 20~98%RH (Refer Image below)

7. Humidity fluctuation: ±2.5%RH

8. Humidity uniformity: 3%RH

9. Cooling speed: 1℃/min in average (without loading)

10. Heating speed: 3℃/min in average (without loading)

11. Internal chamber material: SUS#304 stainless steel, mirror finished

12. External chamber material: Stainless steel

13. Cooling method: Air cooling

14. Controller: LCD touch screen, programmable control temperature and

    humidity ,can set different parameter for cyclic test

15. Insulation material: 50mm high density rigid Polyurethane foam

16. Heater: Explosion-proof type SUS#304 stainless steel fins radiator pipe

    heater

17. Compressor: France Tecumseh compressor

18. Lighting: Heat resistance

19. Temperature sensor: PT-100 dry and wet bulb sensor

20. Observation window: Tempered glass

21. Testing hole: Diameter 50mm, for cable routing

22. Sample tray: SUS#304 stainless steel, 2pcs

           

Safety Protection Device:

• Protection for leakage

• Over-temperature

• Compressor overvoltage and overload

• Heater short circuit

• Water shortage

Chamber Design Features:

1. High performance and quiet operation (68 dBA)

2. Space-saving designed for flush installation to wall

3. Full thermal break around doorframe

4. One 50mm diameter cable port o left, with flexible silicone plug

5. Accurate wet/dry-bulb humidity measurement system for easy maintain

Programmable Controller:

1. PLC controller for test chamber

2. Step types include: ramp, soak, jump, auto-start, and end

3. RS-232 interface to connect computer for output

Our Services：

If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.